# midiRebind Was originally designed to get/send midi commands to a GrandMA but can be configured to bind any custom SysEx or midi (or whatever actually) message To do so add a custom patch (or use a currently defined one, but chances are patches made for one SysEx won't work on another) and add a parser in the mapping directory [![Tests](https://github.com/Malphaet/midiRebind/actions/workflows/tests.yml/badge.svg)](https://github.com/Malphaet/midiRebind/actions/workflows/tests.yml) # Depends * Mostly mido (pip install mido) for the midi binding and rtmidi (sudo apt install python-rtmidi) * test.py depends on the submodule minitest witch also depends on blessings (pip install blessings). test.py is not a core part of the program * This program is python3 dependant (on linux you must install the python3 dependencies instead (pip3 install mido and install python3-rtmidi)) # Config Syntax * [interface] : All important information concerning the midi interface * input : Choose which Midi interface to listen to * output1 : Choose which Midi interface to output to; an arbitrary number can be specified that way * inputchanel : Which midi channel to listen to * outputchannel1 : Which midi channel to output to * mapping : The python file in mapping to set up all the mapping between input and output * [set/1] patch the first layer of set commands, what is defined as the first layer is in the mapping file * Basic usage : incoming note = interface/commandtype/note/intensity * Examples: * 5-50 = 1/cc/11 #Map the faders 5-50 to the control change 11-45 (Straight patch) on output 1 * 57-67 = 1/cc/12-32 # Will map linearly 57 to 12; 58 to 14 etc. on output 1 * 56 = 2/note/152 #Map fader 56 to note 152 on output 2 * Advanced usage: Can add logic to the notes. NB: they must be defined first * 56/cond = lambda x: x==50 # Function choosing conditions on the value to send * 57/toggle = 0/127: Toggle the val between 127 and 0 every time the note is received * 68/func = functionMappedInTheMappingInterface(note,intensity,parameters)