#!/bin/python3 ################################ # IMPORTS import socketserver ################################ # CONFIG VARIABLES _HOSTS = [("192.168.0.140","10500")] ################################ # _DEVICES_VALUES={ 257:"Eikos2", 258:"Saphyr", 259:"Pulse2", 260:"SmartMatriX2", 261:"QuickMatriX", 262:"QuickVu", 282:"Saphyr - H", 283:"Pulse2 - H", 284:"SmartMatriX2 - H", 285:"QuickMatriX – H" } _LAYERS={ "Audio":7, "Logo2":6, "Logo1":5, "PIP4":4, "PIP3":3, "PIP2":2, "PIP1":1, "Frame":0 } _SRC={ "No input":0, "Input 1":1,"Frame 1":1, "Input 2" :2, "Frame 2":2, "Input 3 ":3, "Frame 3":3, "Input 4" :4, "Frame 4":4, "Input 5" :5, "Frame 5":5, "Input 6" :6, "Frame 6":6, "Input 7" :7, "Frame 7":7, "Input 8" :8, "Frame 8":8, "Input 9" :9, "Frame 9":9, "Input 10" :10, "Frame 10":10, "Color":11, "Black":11 } _FILTER={ "Auto-Scale":1, "Source":2, "Pos/Size":4, "Transparency":8, "Cropping":16, "Border":32, "Transition":64, "Timing":128, "Effects":256, "Audio layer":512, "No filter":0 } ################################ # CLASS DEFINITIONS class analogController(object): "AnalogWay Controller, controls one AnalogWay device" def __init__(self,ip,port): pass def connect(self): """The device acts as a server. Once the TCP connection is established, the controller shall check that the device is ready, by reading the READY status, until it returns the value 1. [*] (* ) The controller shall wait and retry until it receives the value 1 """ pass def getDevice(self): """This read only command gives the device type [?] (DEV ) :_DEVICES_VALUES """ pass def getVersion(self): """his read only command gives the version number of the command set. It is recommended to check that this value matches the one expected by the controller. [VEvar] (VEvar) """ pass def getStatus(self,value=3): """Reading a change of values [#] (# ) The controller must wait for to equals 0 for the end of enumeration :1 All register values 3: Only non default values """ pass def _keepAlive(self,val=1): """Send a keepalive to check (and ensure) the connection is still up [SYpig] Will return the invert of the value sent: 0x0000 0000 will return 0xFFFF FFFF """ pass def changeLayer(self,screen,ProgPrev,layer,src): """Change the layer of selected [,,,PRinp] Change the input on a selected layer is the RCS² screen number minus 1. is 0 for Program, 1 for Preview. is a value representing the destination Layer. is a value representing the input source. """ pass def takeAvailable(self,*screens): """Test for take availability [,GCtav] Test take availability on screen (GCtav,0) : Take is unavailable (GCtav,1) : Take is available""" for screen in screens: pass def take(self,screen): """ Take a specific screen [Wait for the TAKE availability on all screen] takeAvailable (screen1,screen2,etc...) [,1GCtak] Launch the TAKE action (GCtak,1) : Take in progress (GCtav,0) : Take is unavailable (GCtak,0) : Take finished <--- Waiting for (GCtav,1) : Take is available """ def takeAll(self): """Take all screens [Wait for the TAKE availability on all screen] takeAvailable (screen1,screen2,etc...) [1,GCtal] Launch the TAKE ALL action Only value 1 is allowed, machine will immediately acknowledge the command, then will do the transition on both screens and last will answer with the 0 value after the end of the TAKE ALL command. (GCtal1) Take all in progress (GCtav,0) : Take is unavailable (GCtav,0) : Take is unavailable (GCtal0) : Take all is finished <--- Waiting for (GCtak,1) : Take is available (GCtak,1) : Take is available """ pass def loadMM(screenF,memory,screenT,ProgPrev,filter): """Load a master memory to a screen ,,,,,1 GClrq () Filter: This parameter allows excluding some preset elements from recalling ProgPrev: This parameter gives the destination preset number, either Program (current preset) or Preview (next preset) screenT: This parameter gives the destination screen number. If only one screen is available, due to device type or device mode, the screen number 0 shall be used memory: This parameter gives the memory slot number to load. The allowed range of values is 0 to 7, corresponding to memories 1 to 8 screenF: This parameter gives the origin screen number, the one from which was recorded the preset. Used with the parameter, they allow loading in a screen a preset stored from the other, in matrix mode. """ pass def quickFrame(self,screen,action=0): """Display (1), Hide(0) a quickFrame Display : ,1CTqfa (CTqfa, 1) Hide : ,0CTqfa (CTqfa, 0) """ pass def quickFrameAll(self,action): """Display/Hide a quickFrame on all screens Display: 1CTqfl (CTqfl 1 R F) Hide: 0CTqfl (CTqfl 0 R F) """ ################################ # QuickFrames # Changelayer