# rping rping is a simple implementation of the Internet Control Message Protocol (ICMP) ping utility. It sends a ping request to a specified IP address and prints the response time if a reply is received. ## Usage drawing To use rping, run the following command: ```cargo run --dest [--request/-r ] [--data/-d ] [--payload/-p ]``` The `--dest` argument is required and specifies the destination IP address to send the ping request to. The `--request`, `--data`, and `--payload` arguments are optional and allow you to specify the ping request, data, and payload values, respectively. If these arguments are not provided, default values will be used. ## Example To send a ping request to the IP address `192.0.2.1` with the default values, run the following command: ```cargo run --dest 192.0.2.1``` To send a ping request to the same IP address with a custom ping request, data, and payload value, run the following command: ```cargo run --dest 192.0.2.1 --request 0x1234 --data 0x5678 --payload "hello world"``` ## License This project is licensed under the MIT License. See [LICENSE](LICENSE) for details.