# Future program task list Backlog for new programs. Both projects below are unstarted; these tasks record future work only, with no implementation or delivery date planned yet. ## DMX interface: “ntec” clone Goal: build a DMX interface with a host driver and microcontroller firmware, using an RP2040 or a similar device. - [ ] Confirm the intended “ntec” reference device/model and compatibility target. - [ ] Define the host platforms, connection protocol and required DMX features. - [ ] Choose the microcontroller and DMX interface hardware. - [ ] Develop the firmware and host driver. - [ ] Validate timing, compatibility and reliable operation with real DMX equipment. - [ ] Document wiring, flashing, installation and usage. ## Dante virtual soundcard — far future Goal: reverse-engineer the behavior needed to build a Dante-compatible virtual soundcard. Feasibility and scope remain to be investigated. - [ ] Define target operating systems and audio input/output requirements. - [ ] Research and document discovery, clock synchronization and audio transport. - [ ] Assess feasibility and identify the requirements for interoperability tests. - [ ] Prototype network audio and virtual soundcard integration. - [ ] Validate interoperability, latency, synchronization and recovery on test hardware. - [ ] Document supported behavior, limitations and setup.