Process Rules ------------- process_001 ########### This rule checks the indent of the process declaration. **Violation** .. code-block:: vhdl architecture rtl of fifo is begin proc_a : process (rd_en, wr_en, data_in, data_out, **Fix** .. code-block:: vhdl architecture rtl of fifo is begin proc_a : process (rd_en, wr_en, data_in, data_out, process_002 ########### This rule checks for a single space after the **process** keyword. **Violation** .. code-block:: vhdl proc_a : process(rd_en, wr_en, data_in, data_out, proc_a : process (rd_en, wr_en, data_in, data_out, **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, proc_a : process (rd_en, wr_en, data_in, data_out, process_003 ########### This rule checks the indent of the **begin** keyword. **Violation** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin process_004 ########### This rule checks the **begin** keyword has proper case. Refer to the section `Configuring Uppercase and Lowercase Rules `_ for information on changing the default case. **Violation** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is BEGIN **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin process_005 ########### This rule checks the **process** keyword has proper case. Refer to the section `Configuring Uppercase and Lowercase Rules `_ for information on changing the default case. **Violation** .. code-block:: vhdl proc_a : PROCESS (rd_en, wr_en, data_in, data_out, **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, process_006 ########### This rule checks the indent of the **end process** keywords. **Violation** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin end process proc_a; **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin end process proc_a; process_007 ########### This rule checks for a single space after the **end** keyword. **Violation** .. code-block:: vhdl end process proc_a; **Fix** .. code-block:: vhdl end process proc_a; process_008 ########### This rule checks the **end** keyword has proper case. Refer to the section `Configuring Uppercase and Lowercase Rules `_ for information on changing the default case. **Violation** .. code-block:: vhdl END process proc_a; **Fix** .. code-block:: vhdl end process proc_a; process_009 ########### This rule checks the **process** keyword has proper case in the **end process** line. Refer to the section `Configuring Uppercase and Lowercase Rules `_ for information on changing the default case. **Violation** .. code-block:: vhdl end PROCESS proc_a; **Fix** .. code-block:: vhdl end process proc_a; process_010 ########### This rule checks the **begin** keyword is on it's own line. **Violation** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin process_011 ########### This rule checks for a blank line after the **end process** keyword. **Violation** .. code-block:: vhdl end process proc_a; wr_en <= wr_en; **Fix** .. code-block:: vhdl end process proc_a; wr_en <= wr_en; process_012 ########### This rule checks for the existence of the **is** keyword on the same line as the closing parenthesis of the sensitivity list. **Violation** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) begin proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin process_013 ########### This rule checks the **is** keyword has proper case. Refer to the section `Configuring Uppercase and Lowercase Rules `_ for information on changing the default case. **Violation** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) IS begin **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin process_014 ########### This rule checks for a single space before the **is** keyword. **Violation** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin process_015 ########### This rule checks for a blank line or comment above the **process** declaration. **Violation** .. code-block:: vhdl -- This process performs FIFO operations. proc_a : process (rd_en, wr_en, data_in, data_out, wr_en <= wr_en; proc_a : process (rd_en, wr_en, data_in, data_out, **Fix** .. code-block:: vhdl -- This process performs FIFO operations. proc_a : process (rd_en, wr_en, data_in, data_out, wr_en <= wr_en; proc_a : process (rd_en, wr_en, data_in, data_out, process_016 ########### This rule checks the process has a label. **Violation** .. code-block:: vhdl process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin process_017 ########### This rule checks the process label has proper case. Refer to the section `Configuring Uppercase and Lowercase Rules `_ for information on changing the default case. **Violation** .. code-block:: vhdl PROC_A : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin process_018 ########### This rule checks the **end process** line has a label. The closing label will be added if the opening process label exists. **Violation** .. code-block:: vhdl end process; **Fix** .. code-block:: vhdl end process proc_a; process_019 ########### This rule checks the **end process** label has proper case. Refer to the section `Configuring Uppercase and Lowercase Rules `_ for information on changing the default case. **Violation** .. code-block:: vhdl end process PROC_A; **Fix** .. code-block:: vhdl end process proc_a; process_020 ########### This rule checks the indentation of multiline sensitivity lists. **Violation** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full, overflow, underflow ) is begin **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full, overflow, underflow ) is begin process_021 ########### This rule checks for blank lines between the end of the sensitivity list and before the **begin** keyword. **Violation** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin **Fix** .. code-block:: vhdl PROC_A : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin process_022 ########### This rule checks for a blank line below the **begin** keyword. **Violation** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin rd_en <= '0'; **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin rd_en <= '0'; process_023 ########### This rule checks for a blank line above the **end process** keyword. **Violation** .. code-block:: vhdl wr_en <= '1'; end process proc_a; **Fix** .. code-block:: vhdl wr_en <= '1'; end process proc_a; process_024 ########### This rule checks for a single space after the process label. **Violation** .. code-block:: vhdl proc_a: process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin process_025 ########### This rule checks for a single space after the : and before the **process** keyword. **Violation** .. code-block:: vhdl proc_a :process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is begin process_026 ########### This rule checks for blank lines between the end of the sensitivity list and process declarative lines. **Violation** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is -- Keep track of the number of words in the FIFO variable word_count : integer; begin **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is -- Keep track of the number of words in the FIFO variable word_count : integer; begin process_027 ########### This rule checks for blank lines between process declarative lines and the **begin** keyword. **Violation** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is -- Keep track of the number of words in the FIFO variable word_count : integer; begin **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) is -- Keep track of the number of words in the FIFO variable word_count : integer; begin process_028 ########### This rule checks the alignment of the closing parenthesis of a sensitivity list. Parenthesis on multiple lines should be in the same column. **Violation** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) process_029 ########### This rule checks for the format of clock definitions in clock processes. The rule can be set to enforce **event** definition: .. code-block:: vhdl if (clk'event and clk = '1') then ..or **edge** definition: .. code-block:: vhdl if (rising_edge(clk)) then event configuration ^^^^^^^^^^^^^^^^^^^ .. NOTE:: This is the default configuration. **Violation** .. code-block:: vhdl if (rising_edge(clk)) then if (falling_edge(clk)) then **Fix** .. code-block:: vhdl if (clk'event and clk = '1') then if (clk'event and clk = '0') then edge configuration ^^^^^^^^^^^^^^^^^^ .. NOTE:: Configuration this by setting the *'clock'* attribute to *'edge'* .. code-block:: json { "rule":{ "process_029":{ "clock":"edge" } } } **Violation** .. code-block:: vhdl if (clk'event and clk = '1') then if (clk'event and clk = '0') then **Fix** .. code-block:: vhdl if (rising_edge(clk)) then if (falling_edge(clk)) then process_030 ########### This rule checks for a single signal per line in a sensitivity list that is not the last one. The sensitivity list is required by the compiler, but provides no useful information to the reader. Therefore, the vertical spacing of the sensitivity list should be minimized. This will help with code readability. .. NOTE:: This rule is left to the user to fix. **Violation** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) **Fix** .. code-block:: vhdl proc_a : process (rd_en, wr_en, data_in, data_out, rd_full, wr_full ) process_031 ########### This rule checks for alignment of identifiers in the process declarative region. **Violation** .. code-block:: vhdl proc_1 : process(all) is variable var1 : boolean; constant cons1 : integer; file file1 : load_file_file open read_mode is load_file_name; begin end process proc_1; **Fix** .. code-block:: vhdl proc_1 : process(all) is variable var1 : boolean; constant cons1 : integer; file file1 : load_file_file open read_mode is load_file_name; begin end process proc_1; process_032 ########### This rule checks the process label is on the same line as the process keyword. **Violation** .. code-block:: vhdl proc_1 : process(all) is **Fix** .. code-block:: vhdl proc_1 : process(all) is process_033 ########### This rule checks the colons are in the same column for all declarations in the process declarative part. Refer to the section `Configuring Keyword Alignment Rules `_ for information on changing the configurations. **Violation** .. code-block:: vhdl variable var1 : natural; variable var2 : natural; constant c_period : time; file my_test_input : my_file_type; **Fix** .. code-block:: vhdl variable var1 : natural; variable var2 : natural; constant c_period : time; file my_test_input : my_file_type; process_034 ########### This rule aligns inline comments between the end of the process sensitivity list and the process **begin** keyword. Refer to the section `Configuring Keyword Alignment Rules `_ for information on changing the configurations. **Violation** .. code-block:: vhdl proc_1 : process () is variable counter : integer range 0 to 31; -- Counts the number of frames received variable width : natural range 0 to 255; -- Keeps track of the data word size variable size : natural range 0 to 7; -- Keeps track of the frame size begin **Fix** .. code-block:: vhdl proc_1 : process () is variable counter : integer range 0 to 31; -- Counts the number of frames received variable width : natural range 0 to 255; -- Keeps track of the data word size variable size : natural range 0 to 7; -- Keeps track of the frame size begin process_035 ########### This rule checks the alignment of inline comments between the process begin and end process lines. Refer to the section `Configuring Keyword Alignment Rules `_ for information on changing the configurations. **Violation** .. code-block:: vhdl proc_1: process () is begin a <= '1'; -- Assert b <= '0'; -- Deassert c <= '1'; -- Enable end process proc_1; **Fix** .. code-block:: vhdl proc_1: process () is begin a <= '1'; -- Assert b <= '0'; -- Deassert c <= '1'; -- Enable end process proc_1;