library IEEE; use IEEE.STD_LOGIC_1164.ALL; use IEEE.numeric_std.all; use IEEE.std_logic_unsigned.all; entity POINTER is generic ( INITX : std_logic_vector INITY : std_logic_vector(8 downto 0) ); port ( MOVEUP : in std_logic; MOVEDOWN : in std_logic; MOVELEFT : in std_logic; MOVERIGHT : in std_logic; MOVE : in std_logic; CLK : in std_logic; HERE : out std_logic; X : out std_logic_vector(9 downto 0); Y : out std_logic_vector(8 downto 0); SYNCX : in std_logic_vector(9 downto 0); SYNCY : in std_logic_vector(8 downto 0) ); end entity POINTER; architecture BEHAVIORAL of POINTER is signal rx : std_logic_vector(9 downto 0) := initX; signal ry : std_logic_vector(8 downto 0) := initY; begin Here <= '1' when syncX(9 downto 3)=rX(9 downto 3) and syncY(8 downto 3)=rY(8 downto 3) else '0'; X <= rX; Y <= rY; process (Clk) is begin if (Clk'event and Clk = '1') then if (Move = '1') then if (MoveLeft = '1' and MoveRight = '0') then if (not (rX = "0000000000")) then rX <= rX - 1; end if; elsif (MoveLeft = '0' and MoveRight = '1') then if (not (rX = "1001111111")) then rX <= rX + 1; end if; end if; if (MoveUp = '1' and MoveDown = '0') then if (not (rY = "000000000")) then rY <= rY - 1; end if; elsif (MoveUp = '0' and MoveDown = '1') then if (not (rY = "111011111")) then rY <= rY + 1; end if; end if; end if; end if; end process; end architecture BEHAVIORAL;