library IEEE; use IEEE.std_logic_1164.all; use IEEE.numeric_std.all; use IEEE.std_logic_unsigned.all; entity SYNCHRONIZER is port ( R : out std_logic; G : out std_logic; B : out std_logic; HS : out std_logic; VS : out std_logic; CLK : in std_logic; DATAIN : in std_logic_vector(2 downto 0); ADDRESSX : out std_logic_vector(9 downto 0); ADDRESSY : out std_logic_vector(8 downto 0) ); end entity SYNCHRONIZER; architecture BEHAVIORAL of SYNCHRONIZER is signal x, nX : std_logic_vector(10 downto 0) := (others=>'0'); signal y, nY : std_logic_vector(20 downto 0) := (others=>'0'); constant tpw : std_logic_vector(1 downto 0) := "00"; constant tbp : std_logic_vector(1 downto 0) := "01"; constant tdp : std_logic_vector(1 downto 0) := "10"; constant tfp : std_logic_vector(1 downto 0) := "11"; signal xstate : std_logic_vector(1 downto 0) := TPW; signal ystate : std_logic_vector(1 downto 0) := TPW; signal enabledisplay : std_logic; signal addressofy, nAddressOfY : std_logic_vector(8 downto 0); begin nX <= X + 1; nY <= Y + 1; nAddressOfY <= AddressOfY + 1; HS <= '0' when XState=TPW else '1'; VS <= '0' when YState=TPW else '1'; EnableDisplay <= '1' when XState=TDP and YState=TDP else '0'; R <= dataIn(0) when EnableDisplay='1' else '0'; B <= dataIn(1) when EnableDisplay='1' else '0'; G <= dataIn(2) when EnableDisplay='1' else '0'; AddressX <= X(10 downto 1); AddressY <= AddressOfY - 30; process (Clk) is begin if (Clk'event and Clk = '1') then if (XState=TPW and X(7 downto 1)="1100000") then X <= (others=>'0'); XState <= TBP; elsif (XState=TBP and X(6 downto 1)="110000") then X <= (others=>'0'); XState <= TDP; elsif (XState=TDP and X(10 downto 1)="1010000000") then X <= (others=>'0'); XState <= TFP; elsif (XState=TFP and X(5 downto 1)="10000") then X <= (others=>'0'); XState <= TPW; AddressOfY <= nAddressOfY; else X <= nX; end if; if (YState=TPW and Y(12 downto 1)="11001000000") then Y <= (others=>'0'); YState <= TBP; elsif (YState=TBP and Y(16 downto 1)="101101010100000") then Y <= (others=>'0'); YState <= TDP; elsif (YState=TDP and Y(20 downto 1)="1011101110000000000") then Y <= (others=>'0'); YState <= TFP; elsif (YState=TFP and Y(14 downto 1)="1111101000000") then Y <= (others=>'0'); X <= (others=>'0'); YState <= TPW; XState <= TPW; AddressOfY <= (others=>'0'); else Y <= nY; end if; end if; end process; end architecture BEHAVIORAL;