vhdl-style-guide/vsg/tests/styles/code_examples/PIC.vhd

251 lines
9.7 KiB
VHDL

----------------------------------------------------------------------------
---- Create Date: 00:12:45 10/23/2010
---- Design Name: pic
---- Project Name: PIC
---- Description:
---- A Programmable Interrupt Controller which can handle upto 8 ----
---- level triggered interrupts.The operating modes available are ----
---- polling fixed priority modes. ---- ----
----------------------------------------------------------------------------
---- ----
---- This file is a part of the pic project at ----
---- http://www.opencores.org/ ----
---- ----
---- Author(s): ----
---- Vipin Lal, lalnitt@gmail.com ----
---- ----
----------------------------------------------------------------------------
---- ----
---- Copyright (C) 2010 Authors and OPENCORES.ORG ----
---- ----
---- This source file may be used and distributed without ----
---- restriction provided that this copyright statement is not ----
---- removed from the file and that any derivative work contains ----
---- the original copyright notice and the associated disclaimer. ----
---- ----
---- This source file is free software; you can redistribute it ----
---- and/or modify it under the terms of the GNU Lesser General ----
---- Public License as published by the Free Software Foundation; ----
---- either version 2.1 of the License, or (at your option) any ----
---- later version. ----
---- ----
---- This source is distributed in the hope that it will be ----
---- useful, but WITHOUT ANY WARRANTY; without even the implied ----
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ----
---- PURPOSE. See the GNU Lesser General Public License for more ----
---- details. ----
---- ----
---- You should have received a copy of the GNU Lesser General ----
---- Public License along with this source; if not, download it ----
---- from http://www.opencores.org/lgpl.shtml ----
---- ----
----------------------------------------------------------------------------
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.NUMERIC_STD.ALL;
entity PIC is
port( CLK_I : in std_logic; --Clock.
RST_I : in std_logic; --Reset
IR : in unsigned(7 downto 0); --Interrupt requests from peripherals.
DataBus : inout unsigned(7 downto 0); --Data bus between processor PIC.
INTR_O : out std_logic; --Interrupt Request pin of processor.
INTA_I : in std_logic --Interrupt ack.
);
end PIC;
architecture Behavioral of PIC is
type state_type is (reset_s,get_commands,jump_int_method,start_polling,tx_int_info_polling,ack_ISR_done,
ack_txinfo_rxd,start_priority_check,tx_int_info_priority,ack_txinfo_rxd_priority,ack_ISR_done_pt);
signal next_s : state_type :=reset_s;
signal int_type : unsigned(1 downto 0):="01";
signal int_index,count_cmd : integer := 0;
type prior_table is array (0 to 7) of unsigned(2 downto 0);
signal pt : prior_table := (others => (others => '0'));
signal int_pt : unsigned(2 downto 0):="000";
signal flag,flag1 : std_logic := '0'; --These flags are used for timing purposes.
begin
process(CLK_I,RST_I)
begin
if( RST_I = '1') then
next_s <= reset_s;
elsif( rising_edge(CLK_I) ) then
flag <= INTA_I;
case next_s is
when reset_s =>
--initialze signals to zero.
flag <= '0';
flag1 <= '0';
int_type <= "00";
int_index <= 0;
count_cmd <= 0;
int_pt <= "000";
pt <= (others => (others => '0'));
if( RST_I = '0' ) then
next_s <= get_commands;
else
next_s <= reset_s;
end if;
DataBus <= (others => 'Z');
when get_commands => --Get commands and operating mode from the processor.
if( DataBus(1 downto 0) = "01" ) then
int_type <= "01";
next_s <= jump_int_method;
elsif( DataBus(1 downto 0) = "10" and count_cmd = 0) then
pt(0) <= DataBus(7 downto 5);
pt(1) <= DataBus(4 downto 2);
count_cmd <= count_cmd + 1;
next_s <= get_commands;
elsif( DataBus(1 downto 0) = "10" and count_cmd = 1) then
pt(2) <= DataBus(7 downto 5);
pt(3) <= DataBus(4 downto 2);
count_cmd <= count_cmd + 1;
next_s <= get_commands;
elsif( DataBus(1 downto 0) = "10" and count_cmd = 2) then
pt(4) <= DataBus(7 downto 5);
pt(5) <= DataBus(4 downto 2);
count_cmd <= count_cmd + 1;
next_s <= get_commands;
elsif( DataBus(1 downto 0) = "10" and count_cmd = 3) then
pt(6) <= DataBus(7 downto 5);
pt(7) <= DataBus(4 downto 2);
count_cmd <= 0;
int_type <= "10";
next_s <= jump_int_method;
else
next_s <= get_commands;
end if;
when jump_int_method => --Check which method is used to determine the interrupts.
flag <= '0';
flag1 <= '0';
int_index <= 0;
count_cmd <= 0;
int_pt <= "000";
if( int_type = "01" ) then
next_s <= start_polling; --Polling method for checking the interrupts.
elsif( int_type = "10" ) then
next_s <= start_priority_check; --Fixed priority scheme.
else
next_s <= reset_s; --Error if no method is specified.
end if;
DataBus <= (others => 'Z');
when start_polling => --Check for interrupts(one by one) using polling method.
if( IR(int_index) = '1' ) then
INTR_O <= '1';
next_s <= tx_int_info_polling;
else
INTR_O <= '0';
end if;
if( int_index = 7 ) then
int_index <= 0;
else
int_index <= int_index+1;
end if;
DataBus <= (others => 'Z');
when tx_int_info_polling => --Transmit interrupt information if an interrupt is found.
if( INTA_I = '0' ) then
INTR_O <= '0';
end if;
if( flag = '0' ) then
DataBus <= "01011" & to_unsigned( (int_index-1),3); --MSB "01011" is for matching purpose.
flag1 <= '1';
else
flag1 <= '0';
end if;
if ( flag1 = '1' ) then
next_s <= ack_txinfo_rxd;
if( INTA_I = '0' ) then
DataBus <= (others => 'Z');
end if;
end if;
when ack_txinfo_rxd => --ACK send by processor to tell PIC that interrupt info is received correctly.
if( INTA_I <= '0' ) then
next_s <= ack_ISR_done;
DataBus <= (others => 'Z');
end if;
when ack_ISR_done => --Wait for the ISR for the particular interrupt to get over.
if( INTA_I = '0' and DataBus(7 downto 3) = "10100" and DataBus(2 downto 0) = to_unsigned(int_index-1,3) ) then
next_s <= start_polling;
else
next_s <= ack_ISR_done;
end if;
when start_priority_check => --Fixed priority method for interrupt handling.
--Interrupts are checked based on their priority.
if( IR(to_integer(pt(0))) = '1' ) then
int_pt <= pt(0);
INTR_O <= '1';
next_s <= tx_int_info_priority;
elsif( IR(to_integer(pt(1))) = '1' ) then
int_pt <= pt(1);
INTR_O <= '1';
next_s <= tx_int_info_priority;
elsif( IR(to_integer(pt(2))) = '1' ) then
int_pt <= pt(2);
INTR_O <= '1';
next_s <= tx_int_info_priority;
elsif( IR(to_integer(pt(3))) = '1' ) then
int_pt <= pt(3);
INTR_O <= '1';
next_s <= tx_int_info_priority;
elsif( IR(to_integer(pt(4))) = '1' ) then
int_pt <= pt(4);
INTR_O <= '1';
next_s <= tx_int_info_priority;
elsif( IR(to_integer(pt(5))) = '1' ) then
int_pt <= pt(5);
INTR_O <= '1';
next_s <= tx_int_info_priority;
elsif( IR(to_integer(pt(6))) = '1' ) then
int_pt <= pt(6);
INTR_O <= '1';
next_s <= tx_int_info_priority;
elsif( IR(to_integer(pt(7))) = '1' ) then
int_pt <= pt(7);
INTR_O <= '1';
next_s <= tx_int_info_priority;
else
next_s <= start_priority_check;
end if;
DataBus <= (others => 'Z');
when tx_int_info_priority => --Transmit interrupt information if an interrupt is found.
if( INTA_I = '0' ) then
INTR_O <= '0';
end if;
if( flag = '0' ) then
DataBus <= "10011" & int_pt; --MSB "10011" is for matching purpose.
flag1 <= '1';
else
flag1 <= '0';
end if;
if ( flag1 = '1' ) then
next_s <= ack_txinfo_rxd_priority;
if( INTA_I = '0' ) then
DataBus <= (others => 'Z');
end if;
end if;
when ack_txinfo_rxd_priority => --ACK send by processor to tell PIC that interrupt info is received correctly.
if( INTA_I <= '0' ) then
next_s <= ack_ISR_done_pt;
DataBus <= (others => 'Z');
end if;
when ack_ISR_done_pt => --Wait for the ISR for the particular interrupt to get over.
if( INTA_I = '0' and DataBus(7 downto 3) = "01100" and DataBus(2 downto 0) = int_pt ) then
next_s <= start_priority_check;
elsif( DataBus(7 downto 3) /= "01100" or DataBus(2 downto 0) /= int_pt ) then
next_s <= reset_s; --Error.
else
next_s <= ack_ISR_done_pt;
end if;
when others =>
DataBus <= (others => 'Z');
end case;
end if;
end process;
end Behavioral;