vhdl-style-guide/vsg/tests/code_examples/graphicsaccelerator/Bresenhamer.fixed.vhd

236 lines
8.5 KiB
VHDL

library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.numeric_std.all;
use IEEE.std_logic_unsigned.all;
entity BRESENHAMER is
port (
WRITEENABLE : out std_logic;
X : out std_logic_vector(9 downto 0);
Y : out std_logic_vector(8 downto 0);
X1 : in std_logic_vector(9 downto 0);
Y1 : in std_logic_vector(8 downto 0);
X2 : in std_logic_vector(9 downto 0);
Y2 : in std_logic_vector(8 downto 0);
SS : out std_logic_vector(3 downto 0);
CLK : in std_logic;
STARTDRAW : in std_logic;
DBG : out std_logic_vector(11 downto 0);
RESET : in std_logic
);
end entity BRESENHAMER;
architecture BEHAVIORAL of BRESENHAMER is
signal myx1, myx2 : std_logic_vector(11 downto 0);
signal myy1, myy2 : std_logic_vector(11 downto 0);
signal p, p0_1, p0_2, p0_3, p0_4, p0_5, p0_6, p0_7, p0_8 : std_logic_vector(11 downto 0);
signal p_1, p_2, p_3, p_4, p_5, p_6, p_7, p_8 : std_logic_vector(11 downto 0);
signal ndx, ndy : std_logic_vector(11 downto 0);
signal dx, dy, t_2dx, t_2dy, neg_dx, neg_dy, t_2neg_dx, t_2neg_dy : std_logic_vector(11 downto 0);
signal dx_minus_dy : std_logic_vector(11 downto 0);
signal minus_dx_minus_dy : std_logic_vector(11 downto 0);
signal minus_dx_plus_dy : std_logic_vector(11 downto 0);
signal dx_plus_dy : std_logic_vector(11 downto 0);
signal state : std_logic_vector(3 downto 0) := "0000";
signal condx1x2, condy1y2 : std_logic;
constant idle : std_logic_vector(3 downto 0) := "0000";
constant init : std_logic_vector(3 downto 0) := "0001";
constant case1 : std_logic_vector(3 downto 0) := "0010";
constant case2 : std_logic_vector(3 downto 0) := "0011";
constant case3 : std_logic_vector(3 downto 0) := "0100";
constant case4 : std_logic_vector(3 downto 0) := "0101";
constant case5 : std_logic_vector(3 downto 0) := "0110";
constant case6 : std_logic_vector(3 downto 0) := "0111";
constant case7 : std_logic_vector(3 downto 0) := "1000";
constant case8 : std_logic_vector(3 downto 0) := "1001";
constant clear : std_logic_vector(3 downto 0) := "1010";
signal ccounter : std_logic_vector(18 downto 0) := "0000000000000000000";
begin
ndx <= ("00" & X2) - ("00" & X1);
ndy <= ("000" & Y2) - ("000" & Y1);
neg_dx <= 0 - dx;
neg_dy <= 0 - dy;
dbg <= p;
dx_minus_dy <= dx + neg_dy;
minus_dx_minus_dy <= neg_dx + neg_dy;
minus_dx_plus_dy <= neg_dx + dy;
dx_plus_dy <= dx + dy;
t_2dy <= dy(10 downto 0) & '0';
t_2dx <= dx(10 downto 0) & '0';
t_2neg_dy <= neg_dy(10 downto 0) & '0';
t_2neg_dx <= neg_dx(10 downto 0) & '0';
p0_1 <= t_2dy + neg_dx;
p0_2 <= t_2dx + neg_dy;
p0_3 <= t_2neg_dx + dy;
p0_4 <= t_2dy + neg_dx;
p0_5 <= t_2neg_dy + dx;
p0_6 <= t_2neg_dx + dy;
p0_7 <= t_2dx + neg_dy;
p0_8 <= t_2neg_dy + dx;
p_1 <= p + t_2dy when p(11)='1' else
p + t_2dy + t_2neg_dx;
p_2 <= p + t_2dx when p(11)='1' else
p + t_2dx + t_2neg_dy;
p_3 <= p + t_2neg_dx when p(11)='1' else
p + t_2neg_dx + t_2neg_dy;
p_4 <= p + t_2dy when p(11)='1' else
p + t_2dy + t_2dx;
p_5 <= p + t_2neg_dy when p(11)='1' else
p + t_2neg_dy + t_2dx;
p_6 <= p + t_2neg_dx when p(11)='1' else
p + t_2neg_dx + t_2dy;
p_7 <= p + t_2dx when p(11)='1' else
p + t_2dx + t_2dy;
p_8 <= p + t_2neg_dy when p(11)='1' else
p + t_2neg_dy + t_2neg_dx;
X <= ccounter(9 downto 0) when state = clear else
myx1(9 downto 0);
Y <= ccounter(18 downto 10) when state = clear else
myy1(8 downto 0);
SS <= state;
WriteEnable <= '0' when state = idle or state = init else
'1';
process (Clk) is
begin
if (Clk'event and Clk = '1') then
if (state = idle) then
if (Reset = '1') then
state <= clear;
ccounter <= (others=>'0');
elsif (StartDraw = '1') then
myx1(9 downto 0) <= X1;
myx1(11 downto 10) <= "00";
myy1(8 downto 0) <= Y1;
myy1(11 downto 9) <= "000";
myx2(9 downto 0) <= X2;
myx2(11 downto 10) <= "00";
myy2(8 downto 0) <= Y2;
myy2(11 downto 9) <= "000";
dx <= ndx;
dy <= ndy;
state <= init;
end if;
elsif (state = init) then
if (dx(11) = '0' and dy(11) = '0' and dx_minus_dy(11) = '0') then
state <= case1;
p <= p0_1;
elsif (dx(11) = '0' and dy(11) = '0' and dx_minus_dy(11) = '1') then
state <= case2;
p <= p0_2;
elsif (dx(11) = '1' and dy(11) = '0' and minus_dx_minus_dy(11) = '1') then
state <= case3;
p <= p0_3;
elsif (dx(11) = '1' and dy(11) = '0' and minus_dx_minus_dy(11) = '0') then
state <= case4;
p <= p0_4;
elsif (dx(11) = '1' and dy(11) = '1' and minus_dx_plus_dy(11) = '0') then
state <= case5;
p <= p0_5;
elsif (dx(11) = '1' and dy(11) = '1' and minus_dx_plus_dy(11) = '1') then
state <= case6;
p <= p0_6;
elsif (dx(11) = '0' and dy(11) = '1' and dx_plus_dy(11) = '1') then
state <= case7;
p <= p0_7;
else
state <= case8;
p <= p0_8;
end if;
elsif (state = case1) then
if (myx1 = myx2) then
state <= idle;
else
myx1 <= myx1 + 1;
p <= p_1;
if (p(11) = '0') then
myy1 <= myy1 + 1;
end if;
end if;
elsif (state = case2) then
if (myy1 = myy2) then
state <= idle;
else
myy1 <= myy1 + 1;
p <= p_2;
if (p(11) = '0') then
myx1 <= myx1 + 1;
end if;
end if;
elsif (state = case3) then
if (myy1 = myy2) then
state <= idle;
else
myy1 <= myy1 + 1;
p <= p_3;
if (p(11) = '0') then
myx1 <= myx1 - 1;
end if;
end if;
elsif (state = case4) then
if (myx1 = myx2) then
state <= idle;
else
myx1 <= myx1 - 1;
p <= p_4;
if (p(11) = '0') then
myy1 <= myy1 + 1;
end if;
end if;
elsif (state = case5) then
if (myx1 = myx2) then
state <= idle;
else
myx1 <= myx1 - 1;
p <= p_5;
if (p(11) = '0') then
myy1 <= myy1 - 1;
end if;
end if;
elsif (state = case6) then
if (myy1 = myy2) then
state <= idle;
else
myy1 <= myy1 - 1;
p <= p_6;
if (p(11) = '0') then
myx1 <= myx1 - 1;
end if;
end if;
elsif (state = case7) then
if (myy1 = myy2) then
state <= idle;
else
myy1 <= myy1 - 1;
p <= p_7;
if (p(11) = '0') then
myx1 <= myx1 + 1;
end if;
end if;
elsif (state = case8) then
if (myx1 = myx2) then
state <= idle;
else
myx1 <= myx1 + 1;
p <= p_8;
if (p(11) = '0') then
myy1 <= myy1 - 1;
end if;
end if;
elsif (state = clear) then
ccounter <= ccounter + 1;
if (ccounter = "1111111111111111111") then
state <= idle;
end if;
end if;
end if;
end process;
end architecture BEHAVIORAL;