vhdl-style-guide/docs/after_rules.rst

127 lines
2.5 KiB
ReStructuredText

.. include:: icons.rst
After Rules
-----------
after_001
#########
|phase_1| |disabled| |error|
This rule checks for **after x** in signal assignments in clock processes.
**Violation**
.. code-block:: vhdl
clk_proc : process(clock, reset) is
begin
if (reset = '1') then
a <= '0';
b <= '1';
elsif (clock'event and clock = '1') then
a <= d;
b <= c;
end if;
end process clk_proc;
**Fix**
.. code-block:: vhdl
clk_proc : process(clock, reset) is
begin
if (reset = '1') then
a <= '0';
b <= '1';
elsif (clock'event and clock = '1') then
a <= d after 1 ns;
b <= c after 1 ns;
end if;
end process clk_proc;
.. NOTE:: This rule has two configurable items:
* magnitude
* units
The **magnitude** is the number of units. Default is *1*.
The **units** is a valid time unit: ms, us, ns, ps etc... Default is *ns*.
after_002
#########
|phase_5| |disabled| |error|
This rule checks the *after* keywords are aligned in a clock process.
Refer to the section `Configuring Keyword Alignment Rules <configuring.html#configuring-keyword-alignment-rules>`_ for information on changing the configurations.
**Violation**
.. code-block:: vhdl
clk_proc : process(clock, reset) is
begin
if (reset = '1') then
a <= '0';
b <= '1';
elsif (clock'event and clock = '1') then
a <= d after 1 ns;
b <= c after 1 ns;
end if;
end process clk_proc;
**Fix**
.. code-block:: vhdl
clk_proc : process(clock, reset) is
begin
if (reset = '1') then
a <= '0';
b <= '1';
elsif (clock'event and clock = '1') then
a <= d after 1 ns;
b <= c after 1 ns;
end if;
end process clk_proc;
after_003
#########
|phase_1| |disabled| |error|
This rule checks the *after* keywords do not exist in the reset portion of a clock process.
**Violation**
.. code-block:: vhdl
clk_proc : process(clock, reset) is
begin
if (reset = '1') then
a <= '0' after 1 ns;
b <= '1' after 1 ns;
elsif (clock'event and clock = '1') then
a <= d after 1 ns;
b <= c after 1 ns;
end if;
end process clk_proc;
**Fix**
.. code-block:: vhdl
clk_proc : process(clock, reset) is
begin
if (reset = '1') then
a <= '0';
b <= '1';
elsif (clock'event and clock = '1') then
a <= d after 1 ns;
b <= c after 1 ns;
end if;
end process clk_proc;