# README screenshots `scan-settings.png` and `scan-result.png` show the real tiny-wb terminal UI, captured on 2026-10-20 from a Linux release binary. Input comes from the [Basic mock device](../mock-device.md), not a physical instrument. The screenshot binary identifies itself as `0.1.4-8ed07cb`; later release/documentation changes did not change this UI. To reproduce the screens, follow the mock-device walkthrough using a temporary copy of the client settings. Set start to 280 MHz, stop to 320 MHz, points to 1001 and repeat to 1. Capture the scan-settings screen after confirming the connection; start the scan and press `m` on the completed plot to show its peak. The mock's peak is near 300 MHz. The displayed CSV filename varies with time. These PNGs were rendered from the application's captured pseudo-terminal output using pyte 0.8.2 and Pillow 13.0.0, with DejaVu Sans Mono and a dark terminal palette. The setup screen is 132 columns by 13 rows; the result is 132 by 26. Colors were enabled (`NO_COLOR` unset). No UI labels or trace values were drawn by hand. The mock run completed acquisition and exported one CSV in a temporary directory. Screenshot tooling is not an application or build dependency.