# Embedded defaults. Copy to config.toml to customize; partial overrides work. # Frequencies here and in CSV are MHz; commands sent to tinySA use Hz. port = "" baudrate = 115200 start_frequency = 240 stop_frequency = 960 points = 10001 repeat = 1 [serial] # Timeout for each blocking serial read, not a whole-scan deadline. timeout_ms = 3000 command_delay_ms = 20 settle_delay_ms = 200 scan_delay_ms = 2000 max_response_bytes = 65536 baudrates = [19200, 38400, 57600, 115200, 230400, 460800, 921600, 1843200, 2000000, 3000000] preferred_ports = ["/dev/ttyACM0", "COM3", "COM5", "/dev/ttyS16"] [scan] # Sent with `zero`; the decoder uses this same offset. zero_offset = 128 frequency_step_mhz = 10 points_step = 100 min_points = 101 max_points = 1000001 max_repeat = 1000 # Retain historical endpoint labels. `firmware` uses span / points instead. frequency_axis = "inclusive" # Retain the historical preparatory text scan until hardware confirms removal. legacy_pre_scan = true [ui] poll_interval_ms = 16 chart_min_dbm = -128.0 chart_max_dbm = 0.0 [output] directory = "." filename_prefix = "scan" include_header = false [logging] filter = "info" directory = "."