4.7 KiB
4.7 KiB
Upstream source catalogue
This catalogue records the authoritative references used to build the local guide. The catalogue was checked on 2026-10-04; the protocol and Ultra-support pages record their targeted 2026-10-05 source review. Prefer these primary sources over retailer listings, reposted manuals, videos, and forum recollections.
Official overview and model data
- tinySA official wiki home — product-family overview and navigation.
- Model comparison — identify ZS405/ZS406/ZS407 and compare frequency, LNA, RBW, scan, generator, storage, and phase-noise capabilities.
- tinySA Basic specification — low/high input and output paths, level limits, filters, speed, and battery.
- tinySA Ultra/Ultra+ specification — analyzer/generator ranges, attenuation, LNA, filters, accuracy, and hardware revisions.
Architecture, limitations, and operation
- Ultra technical description — mixer, IF, filter, detector, generator, and calibration-source signal paths.
- Ultra mode — low-pass bypass, mirror/spur elimination, sensitivity and bandwidth limitations, LO leakage, and unlock behavior.
- Ultra limitations — RBW, speed, images, low-frequency sensitivity, LNA overload, and 48 MHz MCU radiation.
- Ultra menu tree — front-panel settings, presets, SD, sweep controls, calibration, expert settings, and generator modes.
- Ultra best-performance settings — recommended automatic expert controls and cautions.
- RBW — coverage, noise-floor, resolution, and sweep-time trade-offs.
- Attenuation — protection and overload/spur diagnosis.
Safety, first use, and maintenance
- Safe operation — current DC-block, transmitter attenuation, and static precautions.
- First use — charging, authenticity, self-test, calibration, and connection warnings.
- Safe transmitter measurement — dBm examples and external attenuation strategy.
- Firmware update — correct download trees, DFU tools/modes, recovery, and post-update steps.
- Ultra battery guidance — charging current and the voltage needed for best RF performance.
USB protocol and firmware implementation
- Official USB interface
— console syntax, command descriptions,
scan,scanraw, framing, options, and documented raw offsets. - Ultra console command example — Ultra build command inventory and example outputs; treat it as a snapshot, not a promise for every firmware.
- Upstream tinySA firmware repository — implementation authority for a matching firmware revision.
sa_cmd.craw source — mode parsing,zero, RBW, Ultra commands, and exactscanrawbyte order and step calculation.main.craw source — shell command registration, prompt behavior context, and build-conditional command availability.
Source-conflict policy
When sources disagree:
- protect hardware using the most conservative official safety value;
- use the comparison/specification page for the exact physical revision;
- use on-device
version,info, andhelpfor the installed build; - use source at the matching firmware revision for byte-level behavior;
- verify ambiguous scan semantics with a low-level known signal and preserve the transcript as a regression fixture.
The local docs intentionally record two known conflicts: the wiki's textual
“MSB LSB” description versus firmware's little-endian byte writes, and
endpoint-inclusive intuition versus the reviewed firmware's integer-divided,
single-precision scanraw step. Both are explained in
the protocol guide.